SKU: LM15
Anti-Aging 4 Colors Light Therapy Silicone Mask (LM15)
Integrated with soothing cryo-cooling nodes tailored for post-laser and peeling calming in tropical Dhaka dermatology centers.
Send Inquiry NowDirect Shenzhen OEM/ODM Engineering: High-Irradiance Photobiomodulation Systems, Silicone LED Masks, and Scalp Care Devices Built for Bangladesh’s Expanding Clinical, Spa, and Retail Distribution Networks.
Engineered to withstand subtropical environmental conditions while providing medical-grade photonic density, calibrated wavelengths, and strict CE/RoHS safety compliances.
Integrated with soothing cryo-cooling nodes tailored for post-laser and peeling calming in tropical Dhaka dermatology centers.
Send Inquiry Now
High-density optical array designed for professional skin revitalization, targeting melasma, acne scarring, and uneven tone.
Send Inquiry Now
Low-level laser therapy (LLLT) platform calibrated at 650nm for clinical and home treatment of androgenetic alopecia and thinning hair.
Send Inquiry Now
Conformable medical silicone panel providing uniform photon dosing across facial contours and décolleté zones.
Send Inquiry NowA comprehensive examination of macroeconomic drivers, clinical adaptation patterns, and regulatory pathways shaping phototherapy device adoption across South Asia.
Bangladesh is experiencing rapid growth in private aesthetic clinics throughout Dhaka (Gulshan, Banani, Dhanmondi, Uttara), Chittagong, and Sylhet. As per capita disposable income increases, consumer demand has transitioned from basic topical cosmetics to non-invasive, technologically advanced clinical therapies.
The South Asian demographic presents specific dermatological challenges, including higher vulnerability to Post-Inflammatory Hyperpigmentation (PIH) and melasma under harsh tropical UV exposure. LED therapy provides non-thermal, non-ablative cellular repair without thermal collateral damage.
Commercial aesthetic equipment deployed in Bangladesh must endure substantial electrical fluctuations and localized power surges. Fanrun incorporates wide-range voltage rectifiers (100–240V, 50/60Hz) and regulated internal DC power supplies to guarantee clinical reliability.
Navigating imports via the Directorate General of Drug Administration (DGDA) and the National Board of Revenue (NBR) requires stringent documentation. Fanrun equips B2B importers with complete technical dossiers, including IEC 60601-1 electrical safety certifications, CE Medical Directives, RoHS compliance test reports by SGS/TUV, and optimized HS Code classifications (9018.90 / 8543.70) to streamline port clearance at Chittagong Seaport and Hazrat Shahjalal International Airport (Dhaka).
Combining world-class optical precision with vertically integrated cost engineering to empower Bangladesh brands and institutional importers.
Procuring through intermediary trading houses frequently inflates capital expenditures by 30% to 55%, while severing communication channels with core optical engineers. As a vertically integrated manufacturer based in Shenzhen—the global epicenter of advanced electro-medical device manufacturing—Shenzhen Fanrun Technology Co., Ltd. eliminates intermediary overhead and maintains total quality supervision over every phase of production.
From tooling fabrication, high-purity medical silicone injection moulding, and automated surface-mount (SMD) diode placement, to optical spectrum calibration and final chamber stress-testing, our facility ensures that every LED therapy system delivers its intended biological dose.
| Optical / Structural Parameter | Fanrun Medical Specification | Standard Consumer Market Tier |
|---|---|---|
| Core Wavelengths | 415nm, 590nm, 630nm, 830nm (±3nm) | Uncalibrated broad-spectrum LEDs |
| Effective Irradiance | 30 – 105 mW/cm² (Clinically Validated) | < 10 mW/cm² (Sub-therapeutic) |
| Contact Material | Liquid Silicone (TUV/SGS Food Grade) | Rigid PVC / Recycled plastics |
| Thermal Dissipation | Heat-conductive PCB + Passive Cooling | No active dissipation (Diode decay) |
| International Certifications | CE, RoHS, FCC, ISO 13485 Standards | Basic unregulated testing |
| Supply Chain Lineage | Shenzhen Cleanroom Direct (Est. 2013) | Multiple brokers / Relabelers |
Targeted solutions engineered to support distinct operational models, from medical dermatology wards to high-volume commercial salons.
In high-end facilities across Dhanmondi and Gulshan, clinicians pair Fanrun 830nm NIR and 630nm red LED devices with fractional CO2 lasers, chemical peels, and microneedling. This synergistic approach halves patient downtime, accelerates dermal healing, and reduces the risk of post-procedural erythema in melanin-rich skin.
Leading salon franchises in Dhaka and Chittagong introduce high-margin "Photofacial Express Lounges". Utilizing our multi-mode silicone masks (LM15/LM10) with blue light (415nm) and yellow light (590nm), salons provide non-invasive acne clearing and radiant toning for bridal preparations.
Androgenetic alopecia represents an escalating concern among South Asian demographics. Hair transplant surgical clinics and trichology centers throughout Bangladesh utilize our 650nm LLLT laser helmet (LH02) as an essential home-maintenance regimen to support post-graft survival and follicle revitalization.
Rigorous pre- and post-treatment clinical evaluations confirming tissue restoration, dermal collagen remodeling, and follicular activation.
“After combining clinical sessions with regular targeted light treatments, skin density improved, fine lines softened, and post-acne scarring showed marked reduction.”
“Consistent application of dual-wavelength red & near-infrared wavelengths demonstrated noticeable toning, reduced pore visibility, and improved skin suppleness.”
“Visible renewal across thinning crown regions within 16 weeks of continuous 650nm low-level laser cap therapy, producing thicker and healthier hair fiber density.”
“Significant improvement in follicular shaft caliber and scalp microcirculation following the recommended LLLT photobiomodulation protocol.”
“Noticeable refinement of textural irregularities and excessive sebum production in humid climate environments after 8 weeks of blue & yellow light therapy.”
“Microneedle delivery combined with immediate photobiomodulation yielded measurable improvements in dermal structural elasticity and overall radiance.”
Every Fanrun system is verified by independent notified bodies to guarantee seamless clearance across global and Bangladesh customs borders.
EN 60601-1-2 / EN 55014 EMC Verification for Hospital & Home Safety.
Zero hazardous heavy metals; 100% lead-free electronic assembly.
ISO 10993 cytotoxicity and non-irritation tested medical silicone.
Direct epidermal contact certification ensuring long-term patient safety.
Authenticity Verification Notice: Bangladesh customs authorities and clinical procurement officers can verify certificates directly through official TUV and SGS verification portals using our test report numbers. Contact our technical office at contact us to request authenticated documentation packs.
Explore our certified catalog of phototherapy, microneedling, and low-level laser platforms available for private label OEM/ODM import across Dhaka, Chittagong, and international territories.
Combines 415nm-830nm optical energy with localized cooling therapy, tailored for post-laser calming in high-humidity climates.
Send Inquiry Now
High-output photodynamic platform designed for aesthetic clinics treating melasma, acne vulgaris, and dermal photodamage.
Send Inquiry Now
Delivers continuous 650nm low-level coherent diode output across 80+ emitters to stimulate anagen follicular growth.
Send Inquiry Now
Flexible ergonomic panel engineered for face, neck, and décolleté rejuvenation with dual 630nm/830nm therapeutic diodes.
Send Inquiry Now
German motor engineering with adjustable needle depth (0.25mm–2.5mm) and high-frequency stable vibration for transdermal drug delivery.
Send Inquiry Now
Specialized contoured silicone system addressing horizontal cervical bands and sun-induced décolleté photoaging.
Send Inquiry Now
Combines 650nm laser diodes with high-intensity red LEDs for dual-action microvascular stimulation and cellular energy replenishment.
Send Inquiry Now
Engineered for high-volume dermatology departments in Dhaka, featuring sterile anti-backflow cartridge integration.
Send Inquiry NowKey regulatory, logistics, engineering, and commercial details addressing the inquiries of corporate buyers and medical distributors.
Connect with our direct technical sales engineering department to obtain comprehensive wholesale B2B pricing, complete TUV/SGS laboratory test dossiers, and bespoke OEM/ODM design proposals developed specifically for the Bangladesh aesthetic and dermatological market.
To verify authenticity, request the certificate number from our team and check it on the issuing body's official portal. Contact us