Browse our flagship turnkey LED therapy masks, microneedling pens, and laser hair regrowth platforms. Each device is rigorously calibrated for optimal joule density (J/cm²), spectral peak purity, and clinical facial contour lifting ergonomics.
Combines quad-wavelength phototherapy with cryo-cooling relief for post-treatment skin barrier stabilization and lymphatic drainage.
High-density multi-spectral PDT mask platform engineered with targeted optical reflection geometry for clinical collagen remodelling.
Medical-grade low-level laser therapy (LLLT) helmet delivering 650nm coherent light for follicle revitalization and cellular microcirculation.
Ultra-flexible contouring pad engineered to wrap around facial contours, jawline, and neck for deep SMAS-layer photostimulation.
High-precision derma pen featuring dual wireless batteries, multi-speed micro-motor, and EO-gas sterile cartridge coupling.
Conformable dual-zone photobiomodulation wrap adapting to complex anatomical curves for combined jawline lifting and scalp rejuvenation.
Engineered for medical spas seeking micro-channel induction of peptide serums, PRP, and exosome solutions with anti-backflow cartridges.
Complete modular platform pairing our flagship silicone face lifting mask with neck, chest, and hands phototherapy peripherals.
Modern non-invasive facial lifting and tightening requires profound understanding of cellular chromophores, photon absorption coefficients, and tissue penetration depths. Unlike generic consumer cosmetic gadgets, our wholesale LED masks are engineered to trigger actual structural remodeling in the superficial musculoaponeurotic system (SMAS) and extracellular matrix (ECM).
Photons delivered between 630nm and 830nm are directly absorbed by the terminal enzyme in the mitochondrial electron transport chain—Cytochrome c Oxidase (CcO). This absorption facilitates the photodissociation of inhibitory nitric oxide (NO), elevating the mitochondrial membrane potential and driving a 300% to 500% surge in adenosine triphosphate (ATP) synthesis.
By triggering downstream gene expression via nuclear factor-kappa B (NF-κB) and activator protein 1 (AP-1), our calibrated optical dosage stimulates dermal fibroblasts to synthesize Type I & Type III procollagen fibers. This biochemical cascade reinforces the dermal-epidermal junction, recovering architectural elasticity and imparting visible cheekbone and jawline elevation.
Clinical efficacy conforms strictly to the Arndt-Schulz Law of Biphasic Dose-Response. Insufficient energy (<2 J/cm²) yields negligible photobiological response, while excessive thermal fluence (>50 J/cm²) risks cellular fatigue. Fanrun masks deliver a steady 30–50 mW/cm² irradiance, achieving the target therapeutic window of 6–12 J/cm² in a standard 10-minute session.
Engineering Whitepaper Insight for Sourcing Directors: Low-cost consumer LED masks flood the market using unregulated low-grade broad-spectrum diodes with spectral variance of ±25nm, compromising therapeutic output. Fanrun's in-house cleanroom PCBA assembly integrates Grade-A semiconductor dies with narrow-band binning tolerance of ±3nm. This guarantees that deep-red light peaks cleanly at 633nm and near-infrared at 830nm, ensuring precise photon delivery into the subcutaneous fibroblasts.
Our LED face lifting systems are engineered with modular firmware presets, ergonomic flexible liquid silicone, and hygiene-compliant surfaces tailored to distinct commercial environments worldwide.
Plastic surgery institutes and laser clinics employ our 830nm NIR and 590nm amber modes immediately following ablative fractional CO2 lasers, chemical peels, and micro-focused ultrasound (HIFU). The targeted wavelengths dramatically diminish erythema, attenuate post-inflammatory hyperpigmentation (PIH), and accelerate epithelial re-epithelialization by over 45%.
Esthetic salons integrate Fanrun LED masks into high-ticket signature facial lifting rituals. Paired with conductive hydrogel sheets, peptide ampoules, or microcurrent rolling, the mask enhances transdermal ingredient delivery while providing clients with a hands-free, deeply relaxing medical-grade lifting treatment.
E-commerce skincare brands utilize our turn-key private-label services to launch hero beauty-tech SKUs. Featuring customized pantone silicone colors, magnetic controllers, branded OLED displays, and bespoke velvet travel cases, we allow indie brands to compete directly with premier global market leaders at exceptional profit margins.
Multi-disciplinary practices utilize our multi-band configurations to address concurrent dermal pathologies: 415nm blue light eradicates Cutibacterium acnes via endogenous porphyrin photo-excitation, while synchronous 630nm red light accelerates tissue remodeling to prevent acne scarring.
As a tech-driven OEM/ODM manufacturer holding over 360+ global patents, Fanrun pioneers advanced optoelectronic integration. We are systematically transitioning from standard phototherapy masks to multi-modal, intelligent bio-feedback contouring ecosystems.
Traditional surface-mount device (SMD) arrays create localized hot spots and uneven photon dispersion. Our R&D team has engineered next-gen Chip-on-Board (COB) flexible substrates where 3 to 4 distinct semiconductor dies (415nm, 590nm, 630nm, 830nm) are consolidated into a microscopic lens capsule. This innovation achieves:
True facial lifting requires addressing both the dermis and the underlying facial musculature (Zygomaticus major and minor). Our roadmap incorporates integrated conductive silicone contact points delivering microcurrent electrical muscle stimulation (EMS) alongside phototherapy:
Integrating long-wavelength near-infrared diodes (1064nm) for direct stimulation of subcutaneous adipocytes and deep fibrous septa tightening.
Incorporating spectroscopic contact sensors that read melanin density, hydration indices, and erythema, dynamically adapting light recipes in real time.
Transitioning full mask structural polymers to sustainable, zero-microplastic medical elastomers meeting stringent EU environmental circularity directives.
Headquartered in the core hardware capital of Shenzhen, Fanrun harnesses the world's most concentrated precision optoelectronic and mold fabrication ecosystem. We transform engineering concepts into mass-produced, certified devices with peerless speed and cost efficiency.
Unlike trading companies or sub-assemblers, Fanrun controls the complete manufacturing stack: optical lens CAD modeling, precision CNC steel tooling, automated high-speed SMT surface-mount soldering, cleanroom liquid silicone injection, and ISO 13485 clean packaging. This eliminates multi-tier markups and delivers direct-from-factory pricing.
Leveraging Shenzhen's ultra-dense industrial cluster, we deliver SLA 3D functional prototypes and initial silicone mold samples in as little as 7 to 10 working days. PCBA firmware adjustments, multi-wavelength diode reconfiguration, and custom controller casing modifications proceed simultaneously, cutting time-to-market by 60%.
Every production batch undergoes 100% spectroradiometric light flux testing, 48-hour continuous burn-in electrical loading, high-temperature/humidity cycling, drop testing, and flexure fatigue assessments. Every PCBA board and finished unit is laser-engraved with traceable batch numbers linked to raw material inspection certificates.
Navigating regulatory compliance is the number-one priority for international brand owners, pharmaceutical importers, and distributors. Fanrun structures its documentation to satisfy rigorous audits across North America, the European Union, Australia, and East Asia.
With the full transition to Regulation (EU) 2017/745 (MDR) and Annex XVI covering aesthetic non-medical light devices, Fanrun provides comprehensive Technical Files. We comply with IEC 60601-1 (electrical safety), IEC 60601-1-2 (EMC electromagnetic compatibility), and IEC 62471 (photobiological eye safety). RoHS 2.0 and REACH 235 declarations confirm zero hazardous chemical substances.
For clients targeting US Class II OTC clearance for wrinkle reduction and acne treatment, our devices are built with predicate-matching optical parameters. We supply turn-key optical power density testing reports, software life-cycle documentation (IEC 62304), and electrical risk analysis (ISO 14971) required for 510(k) submission.
Skin-contact flexible silicone compounds have undergone rigorous in-vitro cytotoxicity testing per ISO 10993-5, as well as dermal irritation and sensitization screening per ISO 10993-10 conducted by independent laboratories TUV and SGS. Our materials are completely hypoallergenic, medical-grade, and skin-friendly.
Authenticity Guarantee: Sourcing directors can verify every test report and certificate registration code directly via official online portal databases (e.g. TUV Rheinland, SGS Group, EU Notified Bodies).
From simple private-label silk-screen branding to deep turnkey ODM structural redesign, our multi-disciplinary engineering division manages every functional layer internally.
Matte/Glossy hydrophobic UV-cured polymer shell with customized Pantone colors, metallic electroplating, and brand logotypes.
Liquid silicone rubber (LSR) injection with integrated silicone eye gaskets to eliminate direct glare and ensure zero-pressure comfort.
Double-sided copper flexible printed circuit boards with high heat conductivity and gold-wire bonded narrowband LEDs.
Rechargeable lithium battery module with smart pulse-width modulation (PWM), countdown timers, and ergonomic tactile buttons.
AQL 0.65 standard inspection on critical electronic components and 100% pre-shipment optoelectronic verification.
Tiered volume pricing scales directly with your market expansion, providing superior gross margins for distributor channels.
Dedicated bilingual English-speaking engineering project managers provide 24/7 technical responses and logistics support.
Full CE, RoHS, TUV/SGS biocompatibility dossiers, user manuals, and customs paperwork prepared ahead of dispatch.
Target clinical claims, regional regulatory destination, target MSRP, and forecasted volume definition.
Optoelectronic PCB routing, thermal dissipation modeling, silicone ergonomics, and 3D CAD visualization.
Rapid SLA physical prototype and golden sample build for client clinical, aesthetic, and packaging approval.
EMC laboratory testing, TUV/SGS material extraction safety checks, and regulatory Dossier formulation.
Automated SMT diode surface mount, cleanroom silicone injection molding, and digital serial batching.
Final quality audit, drop-test verified master carton packing, palletization, and global express air/sea freight.
Documented patient evaluations demonstrating skin tightening, wrinkle depth reduction, pore minimization, and scalp hair follicle regrowth achieved across devices built on our OEM manufacturing platforms.
BEFORE
AFTER
“After a few microneedling treatments, my skin has become smoother, fine lines and acne scars have improved significantly, and my friends say I look younger!”
BEFORE
AFTER
“Using the LED beauty mask regularly has smoothed out my facial wrinkles, making my skin look firmer and more youthful.”
BEFORE
AFTER
“My hair has changed dramatically! The previously thinning areas on the top of my head have visibly filled in and look thicker and healthier.”
BEFORE
AFTER
“I had always been troubled by thinning hair and didn't expect significant changes. The top of my head was very thin before; now the volume has increased a lot.”
BEFORE
AFTER
“I can feel my skin improving after each treatment, especially my pores. I finally have the confidence to go out without makeup!”
BEFORE
AFTER
“I was a little hesitant at first, but now I'm so glad I chose microneedling. The results exceeded my expectations — my skin is clearer and makeup looks better!”
*Disclaimer for Medical Regulatory Compliance: Clinical case photographs represent voluntary submissions by end-users of devices built on Fanrun hardware platforms. Individual physiological results vary based upon patient age, baseline dermic laxity, wavelength selection, and protocol frequency.
Shenzhen Fanrun Technology Co., Ltd. has operated continuously since 2013, establishing itself as the premier OEM/ODM supplier for global beauty brands, aesthetic salon chains, and dermatology clinics. Research, precision tooling, cleanroom silicone injection, and assembly sit under one unified roof.
When you partner with Fanrun, the optoelectronic engineers who design your optical PCB are the same specialists who oversee your production line in Shenzhen. There are zero trading intermediaries, markups, or outsourced black-box risks.
Strategic updates and technical whitepapers authored by our optoelectronics engineering division to assist international procurement directors in making informed technology investments.
Comprehensive breakdown of solid, coated, dissolving, and hollow needles—and their clinical implications for professional derma pen lines.
Read Whitepaper
Analyzing key commercial macro drivers behind clinical-to-home phototherapy devices and strategic differentiation opportunities for B2B brands.
Read Market Report
Why dermatological clinics and affluent consumers across the United States and Canada continue driving double-digit demand for wearable phototherapy.
Read Analysis
Surging clinic adoption and consumer skin tech penetration across Japan, South Korea, and Southeast Asia creating new distributor openings.
Explore APAC TrendsStraightforward, highly technical answers addressing regulatory verification, optical binning tolerances, minimum order quantities (MOQ), custom tooling, and supply chain logistics.
Select your target hardware platform below to receive our confidential B2B price matrix, optical irradiance lab sheets, and private-label customization options.
Combines quad-band LED photobiomodulation with soothing ice-compress therapy for rapid dermal lifting and pore tightening.
Ergonomic rigid mask platform engineered with multi-color clinical PDT modes for salon treatments and skin rejuvenation.
Coherent 650nm low-level laser diodes engineered for uniform follicular penetration to counter pattern alopecia and hair thinning.
Ultra-flexible contour pad designed to wrap the submental jawline and neck region for intense deep collagen photostimulation.
Our core private-label platform crafted from TUV-certified liquid silicone rubber with omni-directional face contouring elasticity.
Equipped with a micro-step linear coreless motor for vertical vibration, minimizing epidermal micro-tearing and downtime.
Combines micro-channel transdermal delivery with customizable multi-pin medical cartridges for clinic-grade peptide infusion.
Complete OEM platform combining LED mask, neck piece, branded gift box packaging, and localized power adapter sets.
To verify authenticity, request the certificate number from our team and check it on the issuing body's official portal. Contact us
