Pre-engineered, multi-spectral optoelectronic systems ready for private label localization, clinical custom firmware, and turnkey distributor procurement.
Flexible food-grade silicone combining red, near-infrared (NIR), blue, and yellow with cryo-cooling soothing modules.
High-density LED array photodynamic system engineered for post-procedure clinical rejuvenation and home medspa lines.
Scalp phototherapy helmet utilizing low-level laser diode matrix to stimulate follicular ATP synthesis and blood microcirculation.
Bendable anatomical matrix panel engineered for facial, neck, and décolleté contouring with high irradiance density.
High-torque brushless motor needle delivery instrument with precision depth calibration and sterile anti-backflow cartridges.
Soft medical-grade silicone face mask engineered with 360-degree facial conformity, zero ocular UV leakage, and certified skin biosafety.
Clinical-grade transdermal collagen induction pen offering multi-speed settings, digital LED readout, and medical alloy needle housing.
High-coverage cold laser cap system calibrated for androgenic alopecia reversal, follicular reactivation, and scalp wellness clinics.
Operating from Shenzhen, China since 2013, Shenzhen Fanrun Technology Co., Ltd. unifies photonics R&D, precision mould design, cleanroom silicone injection, firmware logic, and regulatory validation under one roof.
We eliminate supply chain hand-offs by housing tooling, SMT surface-mount technology, silicone compression, cleanroom assembly, and packaging within our direct facilities, guaranteeing zero middle-man price distortion.
Our complete device range conforms to CE (EMC/LVD), RoHS, and electrical safety standards. Skin-contact silicone components undergo rigorous biocompatibility, cytotoxicity, and food-grade safety verification under TUV and SGS testing protocols.
From custom shell silicone molds and proprietary spectral band engineering to bespoke mobile application Bluetooth controllers and luxury unboxing design, we empower global skincare distributors and clinic franchises.
A macro-economic analysis of how dermatologist clinics, beauty conglomerates, and e-commerce aggregators evaluate contract manufacturers.
Global beauty brands are moving away from low-cost "novelty" face masks with underpowered LEDs. Enterprise buyers now evaluate optical power density (mW/cm²), spectral bandwidth accuracy (narrow FWHM under 15nm), and uniformity across target dermatological zones to avoid customer disappointment and clinical inefficacy.
With regulatory bodies tightening classifications on energetic aesthetic devices (EU Medical Device Regulation 2017/745 Annex XVI and FDA 510(k) enforcement on light-based devices), sourcing directors require factories that maintain complete Technical Documentation Files, biocompatibility proof, and ISO 13485-compliant manufacturing.
Procurement teams increasingly disqualify trading brokers who re-label outsourced assemblies. Brand safety mandates factory-direct traceability where die-bonding, PCB flex circuit assembly, silicone injection molding, and finished goods testing occur under one auditable physical address.
How Fanrun engineers optical pathways to stimulate mitochondrial Cytochrome c Oxidase and trigger fibroblasts without inducing thermal tissue damage.
Blue photon emission targets porphyrins synthesized by acne-causing bacteria. Excitation triggers singlet oxygen release, eradicating bacterial colonies without systemic antibiotics.
Yellow light penetrates the papillary dermis to calm erythema, stimulate lymphatic circulation, and accelerate post-laser or post-peel recovery.
Deep Red photons are absorbed by mitochondrial chromophores, boosting ATP synthesis, stimulating collagen type I synthesis, and attenuating matrix metalloproteinases (MMPs).
Near-infrared radiation penetrates through deep dermal architecture into subcutaneous tissue, reducing chronic inflammation, repairing micro-wounds, and fortifying cellular integrity.
From flexible silicone casting to custom PCB layout, explore the structural stack manufactured in our Shenzhen factory.
Biocompatible, liquid-injection molded food-grade silicone tested via TUV/SGS. Waterproof, hypoallergenic, and formulated to resist discoloration from skincare serums.
Proprietary micro-lenses disperse LED cone angles across 120 degrees, eliminating "hot-spotting" and guaranteeing uniform irradiance across the face, nose, and periorbital zone.
Ultra-thin, bend-resistant flex PCB populated with high-lumen SMD diodes. Thermally engineered with copper sub-layers to dissipate heat and prevent dermal overheating.
Intelligent microcontrollers with constant-current drivers, programmable pulse-width modulation (PWM), automated multi-spectral cycle timers, and safety cut-offs.
Collaborative definition of target market irradiance (e.g. 30-55 mW/cm²), chosen wavelength array, budget milestones, and target regional certifications (CE/RoHS/FDA).
Custom 3D CAD modeling, facial ergonomic conformity mapping, optical reflection simulations, and eye-protection seal design by our senior optoelectronic engineers.
Rapid functional tooling, SMT pilot boards, spectrometer irradiance validation, and physical sample submission for brand approval within 14-21 business days.
Product compliance documentation preparation, third-party laboratory safety testing (EMC, LVD, Photobiological Safety IEC 62471), and biocompatibility audits.
Cleanroom mass production under strict ISO quality management. Multi-stage testing including burn-in thermal runs, flex stress tests, and automated lumen output checks.
AQL 1.5 final pre-shipment quality audit, drop-tested custom retail packaging, full export documentation, and direct bonded logistics dispatch to EU, US, and APAC ports.
Shenzhen Fanrun's technological trajectory through 2026-2028: transforming passive masks into intelligent aesthetic diagnostic instruments.
Transitioning beyond standard SMD LEDs to Vertical-Cavity Surface-Emitting Lasers (VCSEL). This architecture provides ultra-coherent monochromatic beam targeting with 4x deeper tissue penetration at lower power consumption.
Integrating miniature bio-impedance and spectral reflectance photoplethysmography (PPG) sensors directly into the silicone rim, allowing real-time assessment of skin hydration, sebum levels, and erythema index to auto-adjust therapy duration.
Complete Bluetooth Low Energy (BLE 5.3) connectivity frameworks enabling beauty brand clients to offer branded iOS and Android companion applications with treatment tracking, gamification, and personalized dermatologist regimens.
Documented observational outcomes reported across our microneedling, LED phototherapy, and low-level laser hair growth platforms.
“After a series of microneedling treatments with the Biopen system, my facial skin texture transitioned significantly. Acne scars and superficial peri-oral fine lines softened visibly, and skin firmness increased noticeably.”
“Utilizing the 633nm + 830nm LED beauty mask regularly over 8 weeks delivered notable improvement in epidermal elasticity and wrinkle depth around the forehead and crow's feet area.”
“My hair density has visibly recovered over a 4-month protocol. Areas around the vertex and crown that were noticeably thinning filled in with thicker, darker terminal hairs using the 650nm laser helmet.”
“I suffered from diffuse thinning for years. I was hesitant about home phototherapy, but adhering to the 3x/week protocol produced measurable improvements in scalp coverage and shaft caliber.”
“I can feel my skin texture improving after each combined yellow/red light session. Pores appear tighter, facial tone is less prone to sudden redness, and foundation applies smoothly.”
“The microneedling cartridge stability and lack of motor vibration made treatments virtually painless. The results exceeded clinical client expectations for skin clarity and post-inflammatory pigmentation.”
Disclaimer: Observational results voluntarily documented by testing subjects. Clinical outcomes vary based on skin phototype, protocol compliance, wavelength selection, and irradiance dosage. Devices are intended for cosmetic and wellness applications unless registered as medical devices in your designated jurisdiction.
Independent accreditation protecting your brand from customs holds, market recalls, and liability disputes.
We maintain zero tolerance for fraudulent test declarations. Global importers are encouraged to request specific report numbers and certificate IDs from our account executives, enabling direct live verification through the official verification portals of TUV Rheinland, SGS, and corresponding accredited notified bodies.
In-depth industry briefs authored by our research teams to assist enterprise procurement forecasting.
Analysis of solid, coated, dissolving, and hollow needles, examining mechanical shear forces, puncture depth precision, and optimal motor stroke length for clinical derma pen lines.
Read Full WhitepaperKey growth vectors driving consumer migration toward at-home aesthetic lasers, photobiomodulation helmets, and hybrid RF/LED skin therapy hardware.
Read Market BriefAn investigation into FDA clearance preferences, dermatologist retail partnerships, and direct-to-consumer digital channels propelling demand across the US and Canada.
Read Regional StudyExpanding medspa infrastructure in Japan, South Korea, and Southeast Asia creating rapid demand for localized OEM flexible silicone masks and LLLT hair helmets.
Read APAC ForecastPrivate label and ODM platforms powering prominent international skincare, wellness, and aesthetic equipment brands.
Detailed technical, compliance, and minimum order answers for distributors, clinic groups, and brand owners.
For OEM private label, we customize exterior silicone colors, brand silkscreen logos, custom LED controller casings, bespoke packaging boxes, and multilingual manuals. For ODM projects, our optical engineers customize flexible PCB layouts, diode quantities (from 100 to 500+ chips), specific target peak wavelengths (e.g. 415nm, 590nm, 630nm, 830nm, 850nm, 1064nm), irradiance flux density, custom pulse frequencies (PWM), and proprietary Bluetooth companion apps.
All finished devices carry CE (EMC & LVD directives) and RoHS 2.0 conformity. Skin-contact components utilize liquid medical-grade silicone that has passed comprehensive food-grade, cytotoxicity, and skin irritation evaluations conducted by accredited testing institutes TUV Rheinland and SGS. Full test reports and Declaration of Conformity (DoC) files are released to verified buyers upon order placement.
Unlike budget factories that source generic indicator LEDs, we partner exclusively with certified optoelectronic wafer foundries. Diode batches are binned for strict wavelength tolerance (±3nm to ±5nm maximum spectral variation). Every assembly line features integrating spheres and calibrated optical spectrometers to ensure irradiance meets specified mW/cm² targets across every square centimeter of the face.
For existing tooling with custom private label branding (logo printing and customized gift packaging), our MOQ starts at 200–500 units depending on the model. For full ODM bespoke silicone tooling and new optical architectures, typical MOQs are 1,000 units. Turnaround is 10–14 days for golden evaluation samples, and 30–35 days for mass container production.
We provide full certificate numbers, testing house identifiers, and project references prior to purchase agreement sign-off. Buyers can input these serial IDs directly into the online authentication databases of TUV Rheinland, SGS, and associated notified bodies to independently confirm authenticity.
We provide a standard 12 to 24-month manufacturer defect warranty on all electronic systems, controllers, and silicone assemblies. Our in-line defect rate remains below 0.3%. For B2B distributors, we provide a 1% free-of-charge spare parts allotment with each container shipment or immediate unit replacement on subsequent orders.
In-production platforms available for immediate distributor procurement, clinical trials, or white-label retail launching.
Integrated photo-thermal and cryo-soothing mask for post-peel recovery and collagen stimulation.
Full-face ergonomic PDT mask platform engineered for clinical medspas and high-volume retail lines.
Engineered cold laser matrix delivering uniform scalp photobiomodulation for follicle rejuvenation.
Flexible contouring silicone panel configured with high-power dual 630nm and 830nm emitters.
Premium lightweight silicone facial mask designed for comfortable wear, minimal eye strain, and deep dermal absorption.
Multipurpose phototherapy pad designed to wrap around facial contours or convert into a therapeutic scalp cap.
Comprehensive clinical mask series offering multi-wavelength targeted protocols for salon and home treatment regimens.
Ergonomic aluminum body derma pen with sterile bayonet cartridges, micro-vibration speed controls, and anti-leak fluid reservoirs.
Connect immediately with our OEM project team via voice or encrypted instant messenger.
WhatsApp: +86 138 2508 0523Shenzhen Fanrun Technology Co., Ltd.
Shenzhen, Guangdong Province, China
Factory-direct production since 2013.
To verify authenticity, request the certificate number from our team and check it on the issuing body's official portal. Contact us
