Engineered with clinical-grade irradiance parameters, medical-grade skin-safe polymers, and flexible mass customization for global beauty and health brands.
Flexible silicone mask combining multi-wavelength LED with integrated dynamic cooling mode for rapid dermal soothing.
View Product Details
Multi-colour photodynamic therapy platform for salons and prestige at-home regimens targeting cellular turnover and blemish relief.
View Product Details
Clinical Low-Level Laser Therapy (LLLT) helmet engineered for full-scalp follicle stimulation and uniform optical dosage.
View Product Details
Contouring bendable light panel targeting delicate facial and neck tissue for collagen induction and fine-line reduction.
View Product Details
Food-grade silicone ergonomic chassis with high-density chip arrays designed for optimal photonic dispersion.
View Product Details
Engineered for brand distributors seeking scalable multi-mode control boards and high-output LED configurations.
View Product Details
Direct factory hair restoration device featuring calibrated 650nm laser arrays for clinical thinning hair interventions.
View Product Details
High-irradiance contouring panel platform optimized for neck, chest, and joint tissue rejuvenation.
View Product DetailsAn engineering analysis of light fluence, mitochondrial ATP transcription, and the global paradigm shift from clinic visits to certified domestic photonic equipment.
Photobiomodulation (PBM) relies on photons within the optical therapeutic window (620–850 nm) being absorbed by mitochondrial Cytochrome c Oxidase. This triggers nitric oxide dissociation, enhances mitochondrial membrane potential, elevates ATP synthase yield, and downregulates pro-inflammatory cytokines in dermal fibroblasts.
Global consumer demand has transitioned from passive topical cosmeceuticals to bio-active electro-optical therapy. The market for home PBM systems is expanding at over 14.5% CAGR, demanding devices that bridge commercial-clinic irradiance (30mW/cm² - 100mW/cm²) with domestic electrical safety.
Fanrun configures narrow spectral bandpasses: 630nm/660nm for superficial collagen synthesis and vascularization; 830nm/850nm NIR photons for deep subcutaneous matrix recovery; 415nm for P. acnes porphyrin breakdown; and 590nm yellow light for lymphatic drainage and erythema reduction.
| Spectral Band | Primary Tissue Target | Depth of Penetration | Biological Action Spectrum | Typical OEM Application |
|---|---|---|---|---|
| 415 nm (Blue) | Epidermis / Porphyrins | 1.0 mm | Singlet oxygen generation, Propionibacterium reduction | Blemish clearing masks |
| 590 nm (Yellow) | Basal Layer / Micro-vessels | 1.5 – 2.0 mm | Lymphatic flush, edema mitigation, anti-redness | Post-treatment recovery |
| 630 / 650 nm (Red) | Papillary Dermis / Follicles | 2.0 – 3.5 mm | Fibroblast proliferation, Procollagen type I upregulation | Anti-aging masks & LLLT helmets |
| 830 / 850 nm (NIR) | Reticular Dermis / Subcutis | 5.0 – 8.0 mm | Deep ATP synthesis, macrophage activation, pain reduction | Contour panels & deep tissue pads |
Why Tier-1 global medical aesthetic brands localize device design, tooling, and high-density surface-mount packaging within Fanrun’s Shenzhen production infrastructure.
Situated within the Greater Bay Area hardware epicenter, Fanrun sources bin-sorted LED wafer dyes, medical silicones, PCBA sub-assemblies, and precision optical lenses within a 25-mile radius, compressing NPI prototyping cycles from months to under 14 days.
Unlike consumer-grade light panels with wide spectral dispersion (±20nm), Fanrun implements tight spectrophotometric binning (±3nm). This ensures every diode produces uniform therapeutic flux without thermal spiking or phototoxicity hazards.
Production processes are maintained under stringent quality management architectures. From automated SMT reflow and ultrasonic liquid silicone rubber (LSR) injection moulding to 100% radiometric testing, consistency is locked batch after batch.
Shenzhen Fanrun Technology Co., Ltd. has developed domestic and medical-grade aesthetic equipment since 2013. We integrate structural industrial design, silicone tooling, optical array calculation, firmware calibration, and worldwide export compliance under one corporate roof.
How global distributors and clinicians deploy Fanrun phototherapy hardware across diverse commercial and home wellness environments.
Lightweight, flexible silicone face and neck masks provide hands-free anti-aging treatment during work-from-home or evening routines, combining low heat generation with high photon delivery.
Used immediately following ablative microneedling, laser resurfacing, or chemical peels, multi-spectrum red/NIR arrays dramatically reduce down-time, suppress erythema, and accelerate tissue repair.
LLLT laser helmets (such as the LH02 platform) emit coherent 650nm monochromatic light to awaken miniaturized hair follicles, serving as an effective non-pharmacological regimen for androgenetic alopecia.
The industry is transitioning toward BLE-enabled smart controllers. Fanrun’s ODM services incorporate personalized treatment tracking, pulsed wave customization, and skin-hydration analytics directly into mobile apps.
Documented outcomes from brand partners utilizing Fanrun LED masks, microneedling pens, and laser hair regeneration devices.
“After a few microneedling treatments, my skin has become smoother, fine lines and acne scars have improved significantly, and my friends say I look younger!”
“Using the LED beauty mask regularly has smoothed out my facial wrinkles, making my skin look firmer and more youthful.”
“My hair has changed dramatically! The previously thinning areas on the top of my head have visibly filled in and look thicker and healthier.”
“I had always been troubled by thinning hair and didn't expect significant changes. The volume has increased noticeably and looks shinier.”
“I can feel my skin improving after each treatment, especially my pores. I finally have the confidence to go out without makeup!”
“I was a little hesitant at first, but now I'm so glad I chose microneedling. The results exceeded my expectations — my skin is clearer!”
BEFORE TREATMENT
AFTER TREATMENT
*Disclaimer: Visuals represent actual volunteer case submissions. Results vary depending on skin tone, session continuity, and optical protocol.
Full regulatory dossiers available for smooth cross-border customs handling across North America, Europe, and Asia-Pacific.
CERT · 01 (CE)
CERT · 02 (RoHS)
CERT · 03 (TUV)
CERT · 04 (SGS)
CERT · 05 (Patents)
Anti-Counterfeit & Audit Policy: Verified procurement buyers can request official certificate registration numbers for direct validation via official TUV Rheinland and SGS online portals prior to issuing Purchase Orders.
A systematic development process from industrial industrial design to regulatory certification.
Definition of clinical targets, irradiance targets (mW/cm²), specific optical wavelengths, market positioning, and target retail pricing.
CAD ergonomic surfacing, 3D modeling, light reflection index computation, and custom PCB flexible circuit architecture.
Rapid CNC and LSR prototype tooling to evaluate facial contouring, heat dispersal, and user controls before steel mould cutting.
Radiometric energy density analysis, EMC, biocompatibility, drop testing, and international certification dossier readiness.
Automated SMT diode placement, liquid silicone injection, laser serial numbering, and batch level traceability.
Drop-tested gift packaging, shrink wrapping, palletization, and sea/air customs clearing documentation.
Market intelligence for purchasing executives, beauty brand founders, and clinical distributors.
Solid, coated, dissolving, and hollow micro-needling systems: clinical differences and OEM pen configurations.
Read Full Report
Examining the structural migration from clinical treatments toward FDA-cleared domestic LLLT laser devices.
Read Full Report
Why US and Canadian consumers lead photobiomodulation adoption, and where margins remain strongest.
Read Full Report
Analyzing hyper-growth across South Korea, Japan, and Southeast Asia for anti-pigmentation beauty platforms.
Read Full ReportFanrun manufactures for leading medical spas, direct-to-consumer labels, and dermatological clinics worldwide.
Key information regarding MOQ, optical validation, custom tooling, and compliance clearance.
For standard private labeling (silk-screen logo printing, custom gift box packaging, custom manual translation), our typical MOQ starts at 200–500 units per model. For bespoke ODM manufacturing involving newly cut silicone tooling, customized LED PCBA layouts, or proprietary controller firmware, MOQs typically range from 1,000 to 3,000 units.
Every Fanrun production batch undergoes spectrometer testing using integrated flux spheres. We measure precise optical power density (mW/cm²) at surface distance, zero-contact, and target tissue depths to prevent cold spots and guarantee that every batch matches clinical parameters.
Yes. Our silicone LED masks use medical-grade, food-contact tested polymers verified by independent laboratories including TUV and SGS. They are thoroughly tested for zero cytotoxicity, absence of volatile organic compounds (VOCs), and hypoallergenic properties.
Standard configurations feature blue (415nm), yellow (590nm), red (630nm/660nm), and near-infrared (830nm/850nm). We also engineer custom multi-chip dies including deep amber, green (525nm), and therapeutic infrared up to 940nm depending on your clinical objectives.
We supply complete CE, RoHS, and FCC compliance dossiers, battery UN38.3/MSDS shipping certificates, and comprehensive technical files to support FDA 510(k) or EU MDR regulatory filings conducted by your authorized representatives.
Standard OEM repeat batches ship in 20–30 days. Initial custom-moulded ODM projects generally require 35–45 days, which includes tooling fabrication, aesthetic surface finishing, prototype sign-off, and mass production runs.
Select your base configuration below and contact our engineering team to request sample runs, technical documentation, or customized tooling quotes.
Ultra-flexible contouring silicone structure with dual-spectrum LED arrays for clinical-level home rejuvenation.
Order Model Samples
Multi-color LED phototherapy mask integrated with localized skin-cooling elements for post-treatment care.
Order Model Samples
High-irradiance rigid mask platform featuring targeted facial coverage and multiple customizable pulse modes.
Order Model Samples
Precision 650nm laser helmet system designed for home-based hair regrowth protocols and trichology brand integration.
Order Model Samples
Flexible wrap design adaptable to facial contours, neck lines, and targeted muscular recovery applications.
Order Model Samples
Professional wired & wireless transdermal delivery device with precision-calibrated puncture depth controls.
Order Model Samples
Dual-purpose flexible phototherapy platform engineered for interchangeable scalp and skin rejuvenation.
Order Model Samples
Turnkey OEM platform ready for custom color variations, brand packaging, and customized treatment firmware.
Order Model SamplesTo verify authenticity, request the certificate number from our team and check it on the issuing body's official portal. Contact us
