Verified baseline configurations engineered for accelerated private label compliance and bespoke ODM customisation.
Combines quad-band photobiomodulation (415nm, 590nm, 630nm, 830nm) with an integrated cooling cryo-mode for soothing post-procedure dermal stress.
View LM15 Architecture
Multi-channel photodynamic therapy (PDT) mask designed for high irradiance, targeting epidermal tone uniformness and severe blemish mitigation.
View LM10 Architecture
Dense 650nm low-level laser therapy (LLLT) diode array delivering uniform scalp follicular stimulation for clinical trichology practices.
View LH02 Architecture
Ultra-flexible contour-adapting red and near-infrared panel engineered for deep collagen upregulation across face, neck, and chest zones.
View LM06 Architecture
Ultra-lightweight medical LSR body with proprietary light dispersion prisms that guarantee minimum photon scatter and maximum optical penetration.
View Silicone Line
High-density multi-diode laser helmet equipped with intelligent optical sensors and active temperature management for professional clinical treatments.
View Helmet Series
Brushless motor system engineered for micro-channel dermal infusion, perfectly paired with pre- and post-phototherapy LED protocols.
View Derma Pen Line
High-precision needle calibration housing with digital RPM display and dual-battery hot-swapping for continuous clinical aesthetic workloads.
View Biopen Q2The shift from generic illuminated beauty novelties to clinical-grade, target-specific photobiomodulation (PBM) hardware marks an inflection point in the global aesthetic market. Brand equity now demands verified spectral purity, quantifiable optical energy density, and medical-grade biocompatibility.
Fanrun LED engines maintain an ultra-tight Full Width at Half Maximum (FWHM) spectral variance below ±5nm. This ensures photon absorption targets mitochondrial Cytochrome c Oxidase precisely at 630nm and 830nm without uncalibrated thermal dispersion.
Unlike consumer-grade copycats that deliver negligible light output, our factory calibrates power output between 30 mW/cm² and 105 mW/cm². This delivers the optimal phototherapeutic window of 3 to 10 J/cm² per cycle without inducing skin cell fatigue or overheating.
Our masks utilize medical Liquid Silicone Rubber (LSR) manufactured in Class 100,000 cleanrooms. The material has undergone full cytotoxicity and sensitization testing certified by TUV and SGS, ensuring safe skin contact across all skin tones and sensitive dermal conditions.
Our hardware platforms adapt across diverse clinical, wellness, and consumer retail environments worldwide. We engineer customized form factors that meet regional operational requirements and compliance demands.
Medical spas and plastic surgery centers deploy our multi-panel 830nm/630nm LED arrays to reduce downtime following chemical peels, fractional laser treatments, and micro-needling. Clinical trials demonstrate up to a 42% reduction in post-inflammatory erythema (PIE).
Global brands license our ergonomic, lightweight flexible silicone masks to power high-margin direct-to-consumer subscription models. Features like one-touch control, USB-C rapid charging, and zero-leakage eye cushions ensure superior compliance and retention.
Day spas and high-end salons utilize our hands-free PDT units (such as LM10 & LM06) for add-on facials. Their plug-and-play presets for balancing, calming, and firming yield predictable treatment results without requiring dedicated technician supervision.
Biohacking lounges, executive health suites, and athletic training clubs incorporate our high-output red light helmets and facial systems into mitochondrial revitalization and circadian rhythm optimization protocols.
Operating from Shenzhen—the world epicenter of optoelectronic and medical manufacturing—Shenzhen Fanrun Technology Co., Ltd. provides international brand partners an integrated production moat that eliminates middle-tier markups and slashes prototype turnaround times.
In-house CNC machining and precision tooling reduce prototype molding lead times from 12 weeks to just 18 days. We formulate custom silicone durometers, anti-bacterial pigments, and ergonomic flex profiles directly within our cleanroom molding department.
High-speed Surface Mount Technology (SMT) lines assemble flexible printed circuits (FPC) with sub-millimeter precision. We perform automated optical spectrum sorting to discard LEDs with chromatic or radiometric drift before circuit placement.
By controlling tier-1 chipsets, high-drain safety-certified lithium battery packs (IEC 62133 / UN38.3), and custom masterbatch silicone stocks, our factory shields your supply line from global shortages and component-cost volatility.
Every device leaving our Shenzhen production line is constructed through a tightly monitored multi-tier assembly hierarchy. Our engineering teams oversee every phase—from optical calculations to firmware integration.
UV-resistant polycarbonate, metallic electroplating, or soft-touch tactile coatings customized with brand silkscreens, embossed logos, and luxury custom packaging.
TUV/SGS certified non-toxic contact layers providing non-occlusive, skin-breathable contact that conforms evenly across dynamic facial topography.
Multi-layer flexible printed circuit board loaded with low-forward-voltage, high-efficiency SMD micro-emitters with optical lenses for uniform beam angle dispersal.
Microprocessor-driven current regulation preventing diode degradation, integrated with auto-timer cycles, proximity sensors, and optional Bluetooth BLE connectivity.
Our streamlined 6-stage engineering and production framework delivers private label branding in as few as 21 days, or complete custom-tooled ODM products in 60-90 days.
Fanrun’s dedicated R&D team advances photobiomodulation technology by integrating smart diagnostics, multi-wavelength chipsets, and real-time biometric dosing into our core OEM/ODM product lines.
Moving from discrete single-color LEDs to co-packaged micro-LED nodes that emit 630nm, 830nm, and 940nm from the exact same sub-millimeter point. This eliminates spatial beam divergence and delivers true multi-spectral phototherapy across the treatment surface.
Integrating non-invasive epidermal capacitance and optical backscatter sensors. Next-generation mask firmware automatically modulates pulse width (duty cycle) and irradiance based on individual skin tone, moisture levels, and dermal response.
Expanding on our LM15 flagship architecture by embedding micro thermoelectric Peltier chips directly into silicone eye and cheek zones. This pairs anti-inflammatory thermal cooling down to 10°C with stimulating red and near-infrared phototherapy in synchronized routines.
Verified user and clinic evaluation results recorded across clinical evaluations and end-user trials utilizing Fanrun OEM/ODM product architectures.
"After a consistent course of microneedling treatments using the high-frequency motorized cartridge system, skin texture showed measurable smoothing, fine periorbital lines diminished, and post-acne scarring visibly filled in."
"Incorporating the 630nm/830nm flexible silicone LED mask regularly into evening regimes tightened sagging facial contours and revitalized dull skin elasticity through collagen induction."
"Thinning top scalp regions showed noticeable density rebound after 16 weeks of 650nm LLLT laser therapy sessions, visibly strengthening dormant hair root diameter."
"Users troubled by diffused thinning along the central parting line noted improved root retention, increased overall hair shaft thickness, and restored scalp vitality."
"Noticeable refinement in enlarged pores and surface sebum balance after alternating 415nm blue light with 630nm collagen modes, helping users achieve clear, foundation-free skin."
"Precision depth control enabled faster re-epithelialization without dermal scarring, leaving skin visibly healthier, clearer, and more receptive to active serums."
*Disclaimer: Documented cases reflect individual user trials across specific cosmetic protocols. These wellness and aesthetic devices are designed for cosmetic support; clinical claims must correspond with the importer's regional regulatory registrations.
Customs clearance and retail success depend on thorough regulatory documentation. Shenzhen Fanrun maintains active third-party testing certifications with leading global testing bodies, including TUV and SGS.
CERTIFICATION · 01
CERTIFICATION · 02
CERTIFICATION · 03
CERTIFICATION · 04
CERTIFICATION · 05
From innovative direct-to-consumer scale-ups to well-established clinical salon suppliers, our manufacturing lines produce flagship devices for brands worldwide.
Actionable analysis from our engineering and regulatory affairs teams on the commercial and technological trends shaping photobiomodulation.
SEP 29, 2024
Analyzing solid, coated, dissolving, and hollow needles alongside motor drive frequencies, helping brands select the ideal cartridge and delivery mechanics.
Read White Paper
SEP 20, 2024
Key growth drivers for at-home phototherapy and low-level laser devices, highlighting key differentiation vectors for emerging brand portfolios.
Read White Paper
SEP 20, 2024
Why consumers in the United States and Canada continue to dominate consumption of at-home aesthetic devices, and how to satisfy FDA 510(k) pathway expectations.
Read White Paper
SEP 20, 2024
Surging consumer adoption throughout Japan, South Korea, and Southeast Asia, highlighting regional ergonomic adjustments and multi-mode requirements.
Read White PaperTechnical and operational answers to the most common questions raised by procurement managers, distributors, and aesthetic brand founders during factory audits.
Expand your brand's presence across light therapy, scalp restoration, and micro-channel dermal infusion with factory-direct supply guarantees.
Our top-tier hybrid platform combining high-efficiency 4-band LED therapy with an active cryo-cooling ring to reduce facial puffiness.
Download LM15 Spec Sheet
Designed for continuous clinic facials and medspa post-treatment care, featuring selectable multi-wavelength photodynamic presets.
Download LM10 Spec Sheet
High-density 650nm low-level laser diode cap delivering consistent, full-scalp photonic coverage for hereditary hair thinning.
Download LH02 Spec Sheet
Contour-conforming silicone light therapy panel targeting the face, neck, and décolleté with synchronized 630nm and 830nm wavelengths.
Download LM06 Spec Sheet
Soft-touch medical-grade LSR mask with patented zero-pressure eye protectors, designed for convenient daily at-home beauty routines.
Explore Silicone Platform
Versatile LED system featuring tailored spectrums for anti-aging, acne clearing, and skin calming, engineered for seamless brand personalization.
Explore Spectrum Series
Ultra-stable digital microneedling system with high-speed micro-puncturing to maximize serum absorption, ideal as a companion to LED therapy.
Explore Microneedling Line
Multi-purpose flexible phototherapy panel designed for both scalp hair rejuvenation and complete facial-neck collagen boosting treatments.
Explore Multi-Zone SystemPartner directly with Shenzhen Fanrun Technology Co., Ltd. for engineering support, strict ISO quality control, TUV/SGS compliant materials, and factory-direct pricing for your brand.
To verify authenticity, request the certificate number from our team and check it on the issuing body's official portal. Contact us
